100% POLYESTER WEIGHT 100 GSM WIDTH 155CM BLACK QUICK-DRYING FABRIC
HT1446

If you want to be cool, this high quality fabric is good for you. The cationic spandex is a durable 4-way stretch fabric with no fading, high color fastness, and smooth texture.

- APPLICATION

Activewear

- COMPOSITION

100%
POLYESTER

WEIGHT
100 GSM

WIDTH
155 CM

FUNCTIONALITY

Anti-Microbial	Anti-Odor	UV Production	Anti-Yellowing	Eco Friendly
High Stretch	Softness	Abrasion Resistance	Cooling Refresh	Wicking
Stretch & Recovery	Customized	UMORFIL	Mechanical Wicking	One Side Wicking One Side Repellent
Body Circulation Boost	Air Permeability	Anti-pilling	Anti-Stain	Thermoregulation

SPECIAL FINISH

Brushed	Peached	Foil	Embossed	Wicking
Antibacterial	Anti-odor	Compression	UPF	Quick Drying

Black Quick-Drying Fabric

This Black Quick-Drying Fabric is a lightweight textile constructed from 100% polyester filament yarns. The material weight is measured at 100 GSM with a usable width of 155 CM. The fabric structure facilitates rapid moisture transport from the interior surface to the exterior, where evaporation occurs. The polyester composition provides resistance to shrinkage and maintains dimensional stability across repeated wash cycles. The black coloration is achieved through solution-dyed or exhaust-dyeing processes that bond pigment to the synthetic fibers.

Technical Specifications

Composition	100% Polyester
Weight	100 GSM
Width	155 CM
Color	Black
Fabric Type	Knitted / Quick-Dry

Core Advantages

Moisture Transport Rate: The 100% polyester composition has a moisture regain of approximately 0.4%, allowing perspiration to move through the fabric structure without absorption.
Lightweight Construction: At 100 GSM, the fabric mass reduces thermal load during physical activity while maintaining structural integrity.
Drying Velocity: Laboratory tests indicate that this fabric dries 3-4 times faster than cotton-based textiles under equivalent ambient conditions.
Shrinkage Resistance: The heat-set manufacturing process limits residual shrinkage to below 2% after industrial laundering.

Product Characteristics

Hydrophobic Surface: Water droplets form beads on the fabric surface rather than penetrating the fiber matrix.
Tensile Strength: Polyester filaments provide breaking strength ranging from 4.5 to 6.0 grams per denier.
Abrasion Cycle Rating: The fabric withstands 25,000 to 40,000 Martindale cycles before surface wear becomes visible.
Color Fastness: Black pigment retention maintains rating of 4-5 on the ISO 105-B02 scale after 40 hours of light exposure.
Breathability: Air permeability measured at 150-200 CFM, supporting convective heat exchange during activity.

Application Scenarios

Running and training apparel requiring low moisture retention

Base layers for multi-sport activities and endurance events

Team sports jerseys where rapid drying reduces post-activity chilling

Travel and outdoor clothing requiring compact packing and short drying windows

Industrial workwear for warm environments where perspiration management is required

Processing Recommendations

Cutting: Use rotary or straight knife cutters with sharp blades to prevent edge fraying. Seam Construction: Employ stretch needles size 70/9 to 75/11. Stitch type 504 (three-thread overlock) or 406 (three-needle coverstitch) maintains seam elasticity. Heat Application: Iron at temperatures not exceeding 110°C. Direct contact with high-heat surfaces may cause fiber glazing. Printing Compatibility: The fabric accepts sublimation transfer at 180-200°C for 45-60 seconds. Screen printing requires addition of 3-5% nylon bonding agent to the ink formulation.

Common Questions and Solutions

Does this fabric pill after repeated washing?

The 100% polyester construction with anti-pilling finish maintains surface integrity for 50+ wash cycles when laundered according to care instructions. Turn garment inside out before washing to minimize surface friction.

What is the recommended water temperature for laundering?

Machine wash at 30-40°C using liquid detergent. Avoid powder detergents with optical brighteners, as these may deposit residue on the hydrophobic fiber surface, reducing moisture transport efficiency.

Can this fabric be used for sublimation printing?

Yes. The 100% polyester composition accepts sublimation inks. Transfer temperature should be maintained between 180°C and 200°C with pressure of 3-5 bar for 45-60 seconds. Higher temperatures may cause edge curling or fiber deformation.

How does this fabric perform in high-humidity environments?

In ambient relative humidity above 80%, the drying rate decreases by approximately 30-40% compared to dry conditions. However, the fabric continues to transport moisture away from the skin due to capillary action within the filament structure.

Storage and Handling Guidelines

Temperature Range:Store rolls at 15-25°C with relative humidity between 40-60% to prevent static accumulation.

Roll Positioning:Maintain rolls in horizontal orientation on pallets. Stack height not to exceed 1.2 meters to prevent compression set.

Light Exposure:Store away from direct UV radiation to preserve black pigment depth and prevent photo-degradation of fiber polymers.

Chemical Avoidance:Do not store in proximity to chlorine-based compounds or oxidizing agents, which accelerate polymer chain scission.

Feature Products

PERFORMANCE KNIT MATT & PLAIN HT045

SOLID MATT SWIMWEAR NYLON FABRIC YT024

RAINBOW PRINTED POLYESTER FABRIC HT935

WILD ANIMAL PRINTED BLUE JERSEY FABRIC HT796

POWER NYLON PLAIN KNITTED FABRIC HT1060

SOLID PLAIN MATT NYLON FABRIC YT024

MAGIC WOODS RECYCLE JERSEY FABRIC HT739

COLORFUL BLOOM PRINTED SPANDEX FABRIC YT024

PINK FLOWER PRINTED NYLON FABRIC YT024

About Us

Haining Yitai Knitting Co., Ltd.

Founded in 2004, Haining Yitai Knitting Co., Ltd has grown into one of the high-quality performance China 100% POLYESTER WEIGHT 100 GSM WIDTH 155CM BLACK QUICK-DRYING FABRIC Suppliers. We are dedicated to developing and manufacturing knitting fabric from the very beginning. After 15 years of development, we have built an excellent R&D group, marketing team, quality control system, experienced dyeing & finishing supporting facility and customer service system. To meet customer's requirements with better service, we are improving and growing up all the time. Yitai Knitting play an important role as Wholesale 100% POLYESTER WEIGHT 100 GSM WIDTH 155CM BLACK QUICK-DRYING FABRIC Exporters. These fabric has been export worldwide.

Our Culture

+ Mission

Make the sportswear fabric better

+ Vision

To be the better sportswear fabric manufacturer in China

News

Detail view

Message

As Yitai, since 2004, we have manufactured knitted sportswear fabrics such as Polyester Jersey Knit Fabric, Spandex/Nylon/Polyester/Poly Knit Fabric, Recycled Polyester Spandex/Activewear/Sportswear Fabric, Polyester Spandex Jersey Yoga Fabric, Polyester Nylon Spandex Fabric For Swimwear, Beach Wear etc. With excellent R&D group, marketing team, quality control system, experienced dyeing & finishing supporting facility and customer service system.

Haining Yitai Knitting Co., Ltd

No. 198 Canghai Road, Warp Knitting Zone, Haining City, Zhejiang, 314419, China Tel: +0086 135 6738 5757 Email: [email protected] [email protected] [email protected]

Language

+0086 135 6738 5757

100% POLYESTER WEIGHT 100 GSM WIDTH 155CM BLACK QUICK-DRYING FABRIC
HT1446